All metal frame filters have a 1/8" tolerance.

The SILVER PATRIOT 94 is designed to provide the highest filtering efficiency available for the majority of furnaces and air conditioners. The 0.12 inch W.G. initial resistance of the SILVER PATRIOT 94 will perform best in systems configured with 1 square foot, or more, of filter area for each ton of air conditioning. Two layers of woven monofilament polypropylene with integral anti-microbial material provide 10 times more filtration than a disposable fiberglass filter. The deep loading center layer of non-woven polyester allows the SILVER PATRIOT 94 to prolong the time between washings.

WARNING: FOR INDUSTRIAL USE ONLY IN UN-OCCUPIED AREAS.
HEALTH HAZARD: EMITS VERY HIGH LEVELS OF OZONE.

Produces Absolutely No Ozone!!

The Quiet Breeze Ionic Air Purifier is the perfect room air purifier because it captures dust and particles in the air and traps them inside the unit - leaving the air in your home or office cleaner and fresher. The best part is there are no filters to change or purchase.

The dust collector inside the purifier is positively charged by ions to trap even the smallest particles of dust, dander, smoke, dirt and dust mites. Its 3 speed operation allows for maximum air purification while remaining whisper quiet.

• 3 Speed Control
• No Filters to Replace
• Simply Remove the Dust Collector and Wipe Clean
• Virtually Maintenance Free
• Ultra Low Energy Use
• Lightweight and Portable
• Coverage Area: 200 sq ft

Specifications

A dirty A/C unit reduces air flow, impairs heat exchange and causes the compressor to needlessly run. This costs the homeowner money due to higher operating costs and shorter equipment life. This wrap around air conditioner filter protects the A/C unit condenser coils from dirt, dust and other debris. The Kool-Wrap helps keep the A/C unit clean to increase efficiency and reduce energy costs. Other benefits include:

• Custom-sized To Your A/C Unit
• Low Resistance To Airflow
• Lifetime Warranty
• Installs in Seconds
• Cleaning Is Simple
• UV Protected Electrostatic Material

Cleaning Instructions

To clean, simply remove the filter from the air conditioner unit and rinse with water opposite the direction of air flow. Allow to dry and place the filter back on the unit.

Installation & Maintenance Tips

• Before installing the Kool-Wrap filter, thoroughly clean and dry the A/C unit. Failing to clean the unit before installing the Kool-Wrap will have a significant negative impact on filter performance.
• We recommend that the Kool-Wrap filter be removed and cleaned every 30 days.
• When cleaning the Kool-Wrap filter, flush with water in the opposite direction of airflow for best results.
• Manufacturer’s Warranty: The Kool- Wrap filter is manufactured to withstand the outdoor elements and is guaranteed to last for the lifetime of the A/C unit on which it was originally installed.

How To Measure

4 Sided Unit

1. Measure the height of the unit (Figure 1).
2. Beginning at one corner, measure the entire circumference of the unit, ending at the same point in which you started (Figure 2).

2 or 3 Sided Unit

1. Measure the height of the unit (Figure 3).
2. Beginning at one end of the vents, measure horizontally to the other end of the vents (Figure 4).
3. Be sure to add 2 inches on each side of the horizontal measurement to allow room for the filter to attach to the unit.

How To Install

4 Sided Unit

• Wrap the filter around the unit (Fig 1) and secure with the three velcro straps (Fig 2).
  

2 or 3 Sided Unit

1. Remove the plastic backing from the velcro pieces on one end of the filter (Figure 3).
2. Attach that end of the filter to the A/C unit and wrap it around to the other side.
3. Remove the plastic backing from the velcro pieces on other end of the filter, pull tight, and attach to the A/C unit (Fig 4).